NewNode on Router - Free Download and Setup Guide

What Is NewNode on Router?

In technical terms, it’s when you run the NewNode on your Router; the effect is that all the machines and devices connected under the Router will encrypt the data of every device connected to your network.

On the other hand, the VPN Router with NewNode can also refer to a router that specially supports setting up a VPN. You may have heard all routers do not support NewNode if your Router is not a VPN router.

Should I Put NewNode On My Router?

Putting NewNode on your Router has both pros and cons. It depends on considering your needs- prioritizing security and privacy over performance could be beneficial. Otherwise, installing it on particular devices might be better for you.

It offers convenience, enhanced security, and broader device coverage, but be prepared for potential control limitations and setup complexities. Consider your priorities to make the proper choice.

How Does The NewNode Work on A VPN Router?

When you install the NewNode APK on your Android or iOS and connect to the proxy server, all data you have to send or receive directly from your smartphone to the proxy server.

NewNode on Router means you don’t have to install the VPN app on all your devices and machines separately. And the NewNode shield protection is available even for something that doesn’t support VPN clients initially.

So if you have the NewNode on your Router, it will encrypt data on all your devices with the exact network, such as TV, Console, and even smart fridges!

How to Install NewNode on Your Router?

NewNode installation begins with the step-by-step guide below by the specialized team of developer Clostra:

Check Your Router Compatibility For NewNode

All the routers do not support NewNode installations, so verifying whether your router model is compatible is essential. Check the manufacturer’s website of your Router or documentation to see if your Router supports NewNode firmware installations. Some popular router brands like Asus, TP-Link, and Netgear often have compatible models for the new version of NewNode released on Jul 5, 2023.

Backup Current Settings First

Before installing NewNode, it’s crucial to back up your Router’s currents. Ensures you can revert to the previous configuration if and goes wrong the installation process NewNode firmware.

Flash the Router with NewNode Firmware

It’s time to install the NewNode firmware on your Router. The process for this step varies depending on the router model and the VPN service you selected earlier. For numerous routers, you’ll need to “flash” the Router with custom firmware that includes NewNode support. Popular firmware options include DD-WRT, Tomato, and OpenWRT.

1. Download the NewNode firmware for your router model from the developer Clostra’s website.
2. Access your Router’s settings panel through a web browser. Typically, you can do this by typing the Router’s default IP address (e.g., 192.168.1.1)
3. into the browser’s address bar.
4. On the firmware upgrade section, upload the downloaded NewNode firmware file.
5. Go to on-screen instructions to complete the flashing process through the official website of Clostra. Be patient, as it may take a few minutes.

Configure the NewNode on Your Router

After successfully flashing the Router with the NewNode firmware, it’s time to configure the VPN settings.

1. Reaccess the Router’s settings panel through your web browser.
2. Look for the NewNode settings section. It’s often labeled as “VPN,” “PPTP,” or “OpenVPN.”
3. Enter the NewNode server address provided by Clostra proxy services.
4. Input your username and password.
5. Configure additional NewNode settings, such as encryption protocols and connection preferences. These can typically be found in your Turbo
6. VPN provider’s documentation.

Connect, Verify, Enable, and Passthrough

Once you’ve configured the NewNode settings on your Router, it’s time to test the connection.

1. Save the settings and finally reboot your Router to apply the changes.
2. Reconnect to your Router’s settings panel after the reboot.
3. Look for a status or connection section indicating whether the NewNode is connected.
4. Verify the VPN status and ensure that it’s connected and functioning correctly.

Test the VPN on Connected Devices

To ensure the VPN works as expected, test it on devices connected to your Router. Connect your devices to the VPN-based encrypted network and perform basic internet activities. You can search on Google “What Is My IP” to check the current location & IP address of the NewNode’s proxy server.

FAQ For NewNode on Router

Can I use & Put NewNode on My Wi-Fi Router?

Yes, you can install and connect NewNode on a router. It data leaks of your devices under the Router, ensuring an encrypted way of staying safe online on any device on your router network.

Is It A Better Idea to Set Up NewNode on My Router?

If you are concerned about your data safety, then in one word- Yes! Your Router will encrypt your connection for every other device, remove the need to install on each item and turn on the NewNode app whenever you want to secure your online journey.

How To Find the Router Login IP Address on Windows 10?

1. From the “Start” menu option, run the “Command Prompt;” window.
2. On the command prompt software, type “ipconfig” and press “Enter;”
3. Your Router’s IP address should be on the “Default Gateway” line.

How To Find the Router Login IP Address on macOS?

1. Open “System Settings” from the Apple taskbar;
2. Then, search “Network;”
3. Here, select “Wi-Fi” -> “Advanced” button -> “TCP/IP;”
4. It should display your router login IP address.

Conclusion

The guide above should be enough to install the NewNode on Router successfully. But remember that your Router should be supported to install the NewNode firmware on the Router.