Swisscows Private Search on Router - Free Download and Setup Guide

What Is Swisscows Private Search on Router?

In technical terms, it’s when you run the Swisscows Private Search on your Router; the effect is that all the machines and devices connected under the Router will encrypt the data of every device connected to your network.

On the other hand, the VPN Router with Swisscows Private Search can also refer to a router that specially supports setting up a VPN. You may have heard all routers do not support Swisscows Private Search if your Router is not a VPN router.

Should I Put Swisscows Private Search On My Router?

Putting Swisscows Private Search on your Router has both pros and cons. It depends on considering your needs- prioritizing security and privacy over performance could be beneficial. Otherwise, installing it on particular devices might be better for you.

It offers convenience, enhanced security, and broader device coverage, but be prepared for potential control limitations and setup complexities. Consider your priorities to make the proper choice.

How Does The Swisscows Private Search Work on A VPN Router?

When you install the Swisscows Private Search APK on your Android or iOS and connect to the proxy server, all data you have to send or receive directly from your smartphone to the proxy server.

Swisscows Private Search on Router means you don’t have to install the VPN app on all your devices and machines separately. And the Swisscows Private Search shield protection is available even for something that doesn’t support VPN clients initially.

So if you have the Swisscows Private Search on your Router, it will encrypt data on all your devices with the exact network, such as TV, Console, and even smart fridges!

How to Install Swisscows Private Search on Your Router?

Swisscows Private Search installation begins with the step-by-step guide below by the specialized team of developer Swisscows:

Check Your Router Compatibility For Swisscows Private Search

All the routers do not support Swisscows Private Search installations, so verifying whether your router model is compatible is essential. Check the manufacturer’s website of your Router or documentation to see if your Router supports Swisscows Private Search firmware installations. Some popular router brands like Asus, TP-Link, and Netgear often have compatible models for the new version of Swisscows Private Search released on May 31, 2023.

Backup Current Settings First

Before installing Swisscows Private Search, it’s crucial to back up your Router’s currents. Ensures you can revert to the previous configuration if and goes wrong the installation process Swisscows Private Search firmware.

Flash the Router with Swisscows Private Search Firmware

It’s time to install the Swisscows Private Search firmware on your Router. The process for this step varies depending on the router model and the VPN service you selected earlier. For numerous routers, you’ll need to “flash” the Router with custom firmware that includes Swisscows Private Search support. Popular firmware options include DD-WRT, Tomato, and OpenWRT.

1. Download the Swisscows Private Search firmware for your router model from the developer Swisscows’s website.
2. Access your Router’s settings panel through a web browser. Typically, you can do this by typing the Router’s default IP address (e.g., 192.168.1.1)
3. into the browser’s address bar.
4. On the firmware upgrade section, upload the downloaded Swisscows Private Search firmware file.
5. Go to on-screen instructions to complete the flashing process through the official website of Swisscows. Be patient, as it may take a few minutes.

Configure the Swisscows Private Search on Your Router

After successfully flashing the Router with the Swisscows Private Search firmware, it’s time to configure the VPN settings.

1. Reaccess the Router’s settings panel through your web browser.
2. Look for the Swisscows Private Search settings section. It’s often labeled as “VPN,” “PPTP,” or “OpenVPN.”
3. Enter the Swisscows Private Search server address provided by Swisscows proxy services.
4. Input your username and password.
5. Configure additional Swisscows Private Search settings, such as encryption protocols and connection preferences. These can typically be found in your Turbo
6. VPN provider’s documentation.

Connect, Verify, Enable, and Passthrough

Once you’ve configured the Swisscows Private Search settings on your Router, it’s time to test the connection.

1. Save the settings and finally reboot your Router to apply the changes.
2. Reconnect to your Router’s settings panel after the reboot.
3. Look for a status or connection section indicating whether the Swisscows Private Search is connected.
4. Verify the VPN status and ensure that it’s connected and functioning correctly.

Test the VPN on Connected Devices

To ensure the VPN works as expected, test it on devices connected to your Router. Connect your devices to the VPN-based encrypted network and perform basic internet activities. You can search on Google “What Is My IP” to check the current location & IP address of the Swisscows Private Search’s proxy server.

FAQ For Swisscows Private Search on Router

Can I use & Put Swisscows Private Search on My Wi-Fi Router?

Yes, you can install and connect Swisscows Private Search on a router. It data leaks of your devices under the Router, ensuring an encrypted way of staying safe online on any device on your router network.

Is It A Better Idea to Set Up Swisscows Private Search on My Router?

If you are concerned about your data safety, then in one word- Yes! Your Router will encrypt your connection for every other device, remove the need to install on each item and turn on the Swisscows Private Search app whenever you want to secure your online journey.

How To Find the Router Login IP Address on Windows 10?

1. From the “Start” menu option, run the “Command Prompt;” window.
2. On the command prompt software, type “ipconfig” and press “Enter;”
3. Your Router’s IP address should be on the “Default Gateway” line.

How To Find the Router Login IP Address on macOS?

1. Open “System Settings” from the Apple taskbar;
2. Then, search “Network;”
3. Here, select “Wi-Fi” -> “Advanced” button -> “TCP/IP;”
4. It should display your router login IP address.

Conclusion

The guide above should be enough to install the Swisscows Private Search on Router successfully. But remember that your Router should be supported to install the Swisscows Private Search firmware on the Router.